Epoxy Countertops in Antelope, CA

Builder-grade tops, updated

Homes from the late 1990s and 2000s often came with laminate counters, tile with stained grout or entry-level granite in dated speckled patterns. Replacing them with quartz or stone means tear-out, templating, weeks of waiting and a big bill. An epoxy pour goes right over the existing top in a couple of days and gives a seamless, glossy surface in nearly any look.

Looks we pour

• Marble: white or cream with soft gray or gold veins.
• Granite and stone: layered colors with depth.
• Metallic: pearlescent swirls in copper, silver or bronze.
• Solid colors: crisp white, matte black or custom tints.
• Clear over wood: a protective, glossy layer for butcher block and live-edge bars.

The process

We cover cabinets, floors and appliances. The existing surface is sanded, repaired and primed. Tile grout lines are filled to create a flat base. A base color goes down, then the design pour, with colors worked by hand into veining or patterns. A clear flood coat seals everything with a smooth edge. After curing, a topcoat adds scratch resistance.

Timeline

Most kitchens take two to three days, plus a cure period before heavy use. You can usually use the kitchen lightly within a couple of days and fully within a week.

Durability

Epoxy is waterproof and seamless, which means no grout to clean and no seams to collect crumbs. It resists most household stains. Like any countertop, it should not be cut on directly, and hot pans should go on trivets, since high heat can mark resin.

Beyond kitchens

We also pour bathroom vanities, wet bars, outdoor kitchen tops under covered patios, laundry folding counters, garage workbenches and commercial reception desks and bar tops. Logos and inlays can be embedded in clear layers for businesses.

Matching floors

Some clients pair a metallic counter with a metallic floor in a bar room or basement for a coordinated design.

Care

Wipe with mild soap and water. Avoid abrasive pads and harsh chemicals. Use cutting boards and trivets. Light scratches can be polished, and a topcoat refresh restores gloss years down the road.

Questions

Can you pour over granite?

Yes, after proper sanding and priming.

Does it look fake?

Done well, marble-look epoxy has real depth. We show photos and samples before you decide.

Is it food safe once cured?

We use countertop-rated resins suitable for incidental food contact after full cure.

Plan your pour

Contact us with a photo of your counters to start.

Is epoxy right for your kitchen?

Epoxy countertops are a great fit for homeowners who want a dramatic, seamless look on a budget and are comfortable using trivets and cutting boards. They are less suited to cooks who routinely set scorching cast iron directly on the counter or who want a surface that will never show a scratch. If you are planning to sell soon, a neutral marble or stone pattern photographs well and appeals to the widest range of buyers. If you are staying for years, a bold metallic or custom color can make the kitchen feel truly yours.

Preparing for the pour

Before we arrive, clear the counters and upper shelves and plan to eat out or use a temporary prep space for a couple of days. Sinks usually stay in place and are masked carefully, while cooktops may be lifted out and reset. We ventilate during the pour and keep pets out of the work area. Once the final coat cures, we remove the tape and plastic and walk through care instructions with you.